Portable EV Charger - Káblová nabíjacia stanica
Type2 Electric Vehicle Portable Charger ( IEC 62196-2 Standard ) with Schuko Plug, UK
3 Pin Plug, CEE Plug, AU Plug Meet IEC 62196-2 (Mennekes, Type 2) EU European
standard Nice shape and easy to use, protection class IP66 (in mated conditions) Apply
to Vehicle Audi A3 e-Tron, BMW i3, BMW i8, Chevrolet Spark, Mercedes B Class E-
Celi, Mercedes S500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van, Porsche
Panamera S PHEV, Volkswagen e-Up,Volkswagen e-Golf, Volvo V60 PHEV...
Nice shape and easy to use, protection class IP66 (in mated conditions)
Standby (for wall mode)
Standby mode : 3.2 W
Item: PCD-030 (IEC 62196-2)
IEC 62196-2 Standard (Mostly used in Europe);
Current: 10A;16A;24A;32A
Voltage Range: 220V ± 10%;
Maximum power: 2.2-8.8KW
Auto charge recovery: Yes;
Over current protection: Yes; 
50, 000 Mating Cycles; 
Cable Strain Relief Feature Insulated Terminal Design; 
Lights-indicates charging status; 
IP66; 
Operating Temperatures: -30° To +50° ; 
Cord Length: 20Feet
Warranty: 1 Years; 
Smooth line design;
Parts can be customized
Box: can print logos on it
Plug: can print logos and choose colors
Cable: can print words or logos and choose colors
How to use
A. How to start charging
Firmly insert the power plug into the outlet on the wall. Ensure the outlet with a rated current 
  2. Insert the Type 1/2 plug into the inlet on the vehicle
  3.The device starts charging automatically after the green charging LED begins to keep blinking
B. How to stop charging
1. Disconnect the power plug from the outlet
2. Disconnect the Type 1/2 plug from the vehicle inlet
3. Put the charger away
C. How to switch the current
1.Press the button to switch the current between 10A and 16A before inserting the charging plug (car side)
D. LED Charging Status
NOTICE FOR USE:
When the car is in low battery, the charger will charge normally with 16AMP.However, when the charge amount is getting higher and higher, the
charger and the car would indicate that the charging current will become lower and lower; it is the common phenomenon that has nothing to do
with malfunction. The major cause is that the electromotor inside the car recognizes that the battery is nearly full, and needs to gradually reduce
the charging current to protect the car battery. This process requires the car to communicate with the charger. Our product is a smart charger that
responds to the car's low charging demand and follows the requirements for battery of the car to provide safety and control of the vehicle during
the charging process. Please be assured use.
Type 1 Electric Vehicle Portable Charging Box ( SAE J1772 Standard ) With Schuko Plug,
CEE Plug, UK Plug, AU Plug, US Plug Meet SAE J1772 (Type 1) North American
standard Nice shape and easy to use, protection class IP66 (in mated conditions) Apply
to Vehicle Chevrolet Volt, Citroen C-Zero, Fisker...
Nabíjanie v zásuvke 380V - 10,16,24,32A (cez redukciu v zásuvke 230V - 10,16A)
Standby : 3W
Nabíjacia stanica do auta. Nabíjajte 2xrýchlejšie. Nabíjačka dodávaná s elektromobilom je obvykle 16A (3kw). Nabíjajte 32A prúdom resp 24,16,10A. Promo cena do vypredania zásob !!! 299€ s DPH.           Kontakt: sk@clevere.eu  0903 994780
Fakturačná adresa: Antik Trade sro Podnikateľská 5 04017 Košice, SLOVAKIA
IČO: 36694371 DIČ: 2022267786 IčDPH:SK2022267786
Type II. Skladom
Type I. Skladom