Wall Mounted EV Charging Station For Electric Vehicle
16/32A Single/Three Phase Electric Car EV Charging Station with LCD Display and Bluetooth Mode A 3.6/7.2/11/22KW Wall-mounted EV Charger with Type2 Outlet Key features -High compatibility It can charge all EVs manufactured in Europe and USA, correctly and effectively. -Easy to install Products...
16/32A Single/Three Phase Electric Car EV Charging Station with LCD Display and Bluetooth
Mode A 3.6/7.2/11/22KW Wall-mounted EV Charger with Type2 Outlet 
Model
BS-B10
Mode
A (with type2 outlet)
Certificate
TUV, CE
Current
16A/32A single/three phase
Power
3.6/7.2/11/22kw
Size
295mm*195mm*70mm
Weight
7kg
Rated supply voltage
220VAC ± 10%
Rated operating frequency
50Hz/60Hz
Charging control pattern
Auto/Button/Key/Card
Protection level
IP66
Key features
-High compatibility
It can charge all EVs manufactured in Europe and USA, correctly and effectively.
-Easy to install
Products are sent to you with associated installation tools. You are able to install the charger indoor or outdoor. Firmly locking the charger on the installation backplane can prevent theft. 
-Small size
This product is small and exquisite, and thus it is very easy to transport, store and install.
-Containing the intelligent chip
It can automatically repair minor charging problems while charging. When a fault occurs, the lights will blink in different ways to indicate different problems.
-LCD Display
shows charging status via screen.
Exquisite Packaging
Package including
Charging equipment assembly 
Wall mounting plate 
Fixed pegboard bolts and screws 
RFID card (Optional) 
Instruction 
Charging station installation board 
Backplane locking screw 
How to use
Four options:
A. Automatic start charging
1. Turn on the power switch, the display shows the standby state, then starting completed;
2. As shown, plug in the charging plug, the charging station indicator shows green, when the charging lamp flashes, it means that the charging has started;
3. After charging is completed, pull out the cable and insert the cable into the socket or on the cable hook.
B. Button start charging
1. Turn on the power switch, the display shows standby, start complete;
2. As shown, plug in the charging plug, the charging station indicator shows green, press the right button of the charging station, when the button lights up as shown, the charging lamp flashes and flashes, indicating that charging has started;
3. After charging is completed, please press the button, pull out the charging cable, insert the cable into the socket or store it on the cable hook.
C. Key start charging
1. Turn on the power switch, the display shows the standby state, start the completion;
2. As shown, plug in the charging plug, the charging station indicator light is green, and there is a keyhole on the right side of the charging station. Insert the unlocking key and twist it 45 degrees to the right. When the charging lamp flashes, It means that charging has been completed;
3. After charging is completed, please pull out the key and insert the cable into the socket or on the cable hook.
D. Swiping start charging
1. Turn on the power switch, the display shows the standby state, start the completion;
2. As shown, plug in the charging plug, the charging station indicator shows green, use the charging card to start charging, when the charging lamp flashes, it means that charging has started.
3. Please re-swipe the card again and the charging is completed, then put the cable back into the socket or on the cable hook.
Security Warning
Failure to follow instructions may result in danger!
▲Regularly check whether the charging station has visible damage, and there may be a electric shock hazard when operating the damaged charging station.
▲Make sure that all safety facilities are available at all times and test regularly to ensure proper operation.
▲If a ground fault occurs, it must be assumed that the base's cable carries the voltage, and after confirming that no high-voltage power is available in the system, the charging station is inspected.
▲Persons who install and use charging poles must observe the principles and regulations to ensure the personal safety and equipment safety of the personnel concerned.
▲Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents.
▲All tools used do not need exposed metal parts should be insulated to prevent exposed metal parts from touching the metal frame, causing a short circuit.
▲Do not modify, retrofit, or change any part by yourself under any circumstances.
▲Ensure the service life and operation of the charging pile are stable, and the environment for use of the equipment should be kept as clean, constant temperature and humidity as possible. The charging pile must not be used in the presence of volatile gas or flammable atmosphere.
▲Be sure to confirm that the input voltage, frequency, circuit breakers and other conditions of the device have already met the specifications before the device is powered on.